A heavy-duty temporary surface protection sheet designed to protect surfaces from moisture, marks and damage.
The closed-cell foam backing protects the surface from impact and is fused to a strong poly-fabric blue weave that gives the product its hard-wearing finish.
Key Benefits
Impact-resistant
Water repellent
Easy to cut and install
Long lifespan; Does not decay or rot
Reusable
Scope Use
Floor Guard Protects:
Natural Stone; Floor, Wall and Bench-tops
Tiled areas
Carpets
Timber Floors
Bench Tops
Protection of Waterproofing membranes
Plus many other varied applications
DISCLAIMER: Masons Floor Guard is not breathable – Please contact your substrate supplier/installer to check if the use of Masons Floor Guard can be used to cover the product (especially in the case of sealed or polished concrete etc). Masons take no responsibility for damage to surfaces on which the product is used over.
Sealing the Seams
Use Mason's Floor Guard Seam Tape to seal the seams of the Floor Guard. This tape has extreme adhesion qualities therefore we don’t recommend using it on finished floor surfaces as the adhesive may leave a residue.
Technical
information
Browse downloadable product files.
1.0 m x 24 m – 24 m²
50 mm x 30 mm
FAQ's
Is Floor Guard water proof?
Floor Guard is water repellent, not waterproof, though as a closed cell foam has some of the best moisture ingress protection in its category.
Can I reuse Floor Guard?
Yes, Floor Guard has excellent strength and durability qualities and is most often reused many times over.
What are the advantages of using Floor Guard over cardboard based alternatives?
Floor Guard is made from a soft foam underlayer with a weather-resistant surface so repels moisture well without degrading and has excellent impact resistance.
Where can I use Floor Guard?
Floor Guard can be used inside and outside. It has been used to protect bench tops, doors, pillars as well as almost any type of flooring.
Where should I NOT use Floor Guard?
We recommend letting freshly poured concrete breathe for 14 days before applying Floor Guard or any floor covering.
How do I minimise the chance of tripping when using a floor covering?
Masons supply Seam Tape, this extremely adhesive tape will help minimize bits sticking up and leading to falling hazards, with any tape used the adhesive can leave a residue so test first or adhere the Floor Guard to itself where possible.
Related products
