Enviro AAC Panel Floor System

WEIGHT: Strong and lightweight

 Enviro has many of the features of a solid concrete floor, but without the weight for handling or loads on the structure. With a working density of 600kg/m3, it’s approximately one-fourth of the weight of concrete. Fitted over timber or steel joists, the span tables offer KPA floor load solutions for homes and offices. Self-levelling floor topping may be used to complete the installation or when the floor covering requires it.

EFFICIENT: Simple to install

 The Enviro Panel Floor System can be installed quickly and efficiently by screwing and glue-fixing each panel to the floor framing, using galvanised bugle screws for timber framing or dual-grip hex-head screws for steel framing. Panels are then mortared together with Masons Enviro ACC glue mortar or bonded with construction adhesive, creating a continuous lightweight masonry floor. The panel sizes may require a slightly different joist set-out than timber-based products to enjoy the full benefits of the system.

ACOUSTICS: Reducing sound between floors

 Enviro panels are effective at absorbing noise and reducing sound transmission between floors, with an STL rating of 35dB for 1000Hz. The porous structure provides sound absorption, along with mechanical vibration energy dampening to reduce sound travel between rooms. See the sound performance table for details.

CLEAN: Low environmental impact

 The Enviro Panel Floor System is energy-efficient, with no harmful pollutants produced during manufacturing. Its inert material is non-hazardous and does not emit harmful gases or vapours. All waste product at point of manufacture is recycled back into the production process.

• Enviro's thermal properties are extremely efficient, which should help architects, builders, and homeowners reduce their energy consumption.

• Enviro is installed quickly and efficiently, reducing vital building time during construction. The panel's convenient sizes allow onsite cutting and wastage to be kept to a minimum.

• Dry Density: 525 kg/m3

• Service Density: 600 kg/m3

• Compressive Strength: 4.0 MPA4.0 MPA

• Bending Strength: 780N – 1000N or above

• Dry Shrinkage Value: 0.8mm/m – 0.03% – 0.05% or 0.3-0.5mm/m

• Water absorption (by volume): Up to 30-35%

• Thermal conductivity: 0.12 w/mk – 0.13 w/mk

• Thermal resistivity: 0.56 ㎡ k/w

• Sound Transmission Loss: 35dB for 1000Hz

• Fire Resistance: 1.5 hours – 2 hours