PlastaSlab

Plaster Specification System for Tilt Slab

PlastaSlab

Generic Downloads

Brochure-button

Product-warranty

Product-warranty

Description

PlastaSlab™ is a masonry render system for smoothing and texturing off form concrete. The system provides a hard durable surface which when painted is waterproof and easier to maintain than a standard painted wall.
Advantages
  • Easy to keep clean and weatherproof when painted
  • A wide range of finishes can be achieved
Special Notes
This system will provide weatherproofing to the wall when properly painted however it is the designers responsibility to provide adequate detailing for penetrations, tops and sealant details.

Application

Substrate
Concrete should be fully cured and dry.
Preparation
Surface should be clean and dry. Dags and proud areas should be ground down. A single coat of Masons Plastaseal Sealer should then be applied to the whole wall to assist with controlling suction during plaster application.
Filling
Hollow and voids must be filled with PlastaTek™ Meshing Plaster. These filled areas can be sanded the next day but it is preferable to fill level as the plaster will be hard and difficult to sand.
Flushing
Basecoat, lightweight basecoat or skimming render can be applied tightly in a thin application to ensure plaster is forced into the surface and then brought out to a flat finish with extra product.
Texturing
The desired texture from the Masons range can now be applied. Options are 1 mm, and Adobe which are painted over with a coat of Masons Limestop Sealer and two coats of Masons Premium Build Highbuild Acrylic Paint.
Painting
Paint in accordance with the chosen texture specification. Premium Build Highbuild Acrylic Paint is recommended. Walls should be dry when painted and the plaster requires 2-3 days curing before application of the paint.
Accessories
PVC corner beads can be used to form straight corners.
Special Notes
This system will provide weatherproofing to the wall when properly painted however it is the designers responsibility to provide adequate detailing for penetrations, tops and sealant details
To inquire about this product or to place an order please contact your Account Manager.
To find out who your Account Manager is, select your region from the dropdown below under ‘Contact a Team Member’.